LED (Green Energy) Fluorescent Lamps and Tubes
LED Fluorescent Lighting Lamps and Tubes
Introduction to LED Fluorescent Lamps
The recently developed and tested LED Fluorescent lights are globally utilized in most environments, from
private/retail markets, to commercial offices, factories and transport services, including marine and signage
applications.The LED fluorescent lights can be easily installed into the fluorescent sockets like the conventional
T8/T12 fluorescent light.
The T5 version will be launched in 2008.
Sizes- Wattages (Equivalent approximate wattages) Length UK Metric and Imperial.
05 watts (Standard 13 watts) - 300 mm = 1 foot
10 watts (Standard 18 watts) - 600 mm = 2 foot
14 watts (Standard 30 watts) - 900 mm = 3 foot
15 watts (Standard 36 watts) - 1200 mm = 4 foot
24 watts (Standard 58 watts) - 1500 mm = 5 foot
Input Voltage – 120 or 230VAC
Benefit and Specifications
High powered LED lamps & fixtures offer higher brightness levels, greater efficiency towards energy saving
levels reducing global warming and the ozone layer
LED lighting is energy saving and the new type of environmentally friendly lighting solution.
LED Fluorescent light consists of high quality LED’s and can emit higher brightness at lower costs.
An 83% average reduction in electrical saving in comparison to standard lighting.
Extra long lifetime expectancy, 60,000 hours when used 8 hours per day.
10 times longer life than standard T8 or T12 fluorescent lighting.
For Food Safety impact test to IK7 use our LED polycarbonate otherwise use the glass version.
NO Mercury or Toxic substances to dispose.
NO WEEE directive fees to pay to dispose.
NO standard or electronic ballast to buy in your luminaire or fitting
Pure white light & high colour rendering index
Installation is simple and easy.
CE and RoHS approved
No Ultra Violet light output to degrade other materials or paintings
Material and Equipment
Specially developed LED electronic strip modules with high specification acrylic outer cover tubes or crystal clear
glass tubes secured with endcaps.
The first ever LED T8 Tube for replacement T8 1200 mm Fluorescent tubes using led technology.
Made with 276 High Powered LED’S that will emit a light output of 1200 Lumens.
That’s over 100 watts compared to incandescent. The power consumption of these Lamps is only 15 watts.
Installation Instructions
Remove the power from the fitting. Remove the old fluorescent lamp. Remove the fitting cover and remove the ballast
or old choke and starter. Wire the twist and lock in series directly to the power connection block.
It is that easy. Refit the cover, install the led fluorescent with the open led lens to the front.
Product Part No: FT81522CR
Specification
Input Voltage – 230VAC
Power Consumption – 15watts
Dimension – L = 1200 mm. W = 30mm
Colour Temperature – Cool White CCT 6000K – 6500K
LED Technology – 276 LED Lumen Output – 1200 Lumens
Features
Ultra long life 60,000 Hours of constant usage
Solid State, high shock /vibration resistant
No heavy Ballast
No RF Interference
Mercury free
Generates little to no heat
Automatically adjusts brightness according to normal lighting conditions
Does not generate radio frequency
Operating temperature from – 40 Deg C to +60 Deg C open to ventilation and perfect for an environment
with extreme climate change.
Instant Soft Start operation.
Flicker Free
Minimum Maintenance apart from an occasional fluorescent lens clean.
Applications
Hotels and Public Houses, Street and Motorway Lighting, Conference and Meeting Rooms, Residential and Institution Buildings
Factories and Offices, Food Displays, Kitchens and Restaurants, Cove and Decorative Lighting, Homes and Flats
Commercial Complexes, Fire, Police and Ambulance Stations, Schools, Colleges & Universities, Hospitals, Residential Rest and Care Homes
Shops, Shopping Centres and Motorway Signs, Discos and Clubs, Architectural Buildings, Galleries and Museums.
Warning Notes
These LED lamps and tubes“DO NOT” require a ballast or starter, which is required for traditional
standard fluorescent tubes. If the ballast and starter is connected to the LED tube it will overdrive
the LED tube when starting and under drive it afterwards causing malfunctions in the LED tube itself.
Links
